Different Types of Top Quality Plaster Supplies and How to Use


Plaster supplies are materials which require proper amount of research done on them before they are purchased. They are available in different sizes, for different requirements like normal wall boards, water resistant plasterboard, fireproof plasterboard, sound reduction to name a few. Their sizes and thicknesses vary according to the requirement. These are available in versatility with some gypsum plaster that is sandwiched in between the layers of thick paper. However, these top quality plaster supplies are manufactured only for the use of walls and ceilings and can be painted too.

While buying your equipment keep different types of top quality plaster supplies in your options as it will be easy for you to choose among the best one.

Plaster Supplies

The Different Types of Top Quality Plaster Supplies are listed below.:

1. Structo-lite: You need to apply base coats in the first step and later the project can be finished easily. This base coat provides an abrasive and thermal resistant layer that will settle underneath and act like an insulation. In case the walls are exposed to high changes in temperatures it comes very durable. This supply is most trusted in the market compared to the other several products available. You can ask your dealer for the sample experiment it over your wall before buying the entire lot for your project.

2Finishing lime: It is constructed from double hydrated dolomitic limestone and is used for gauging plasters. This material is able to stretch according to the requirements of the different types of masonry products. They can also be mixed with other supplies as substitutes and acts like the right combination for the plastering project.

3. Ceiling texture spray: Applying this texture to the ceiling with the use of correct tools and products might be challenging. It allows the cover-up of any mistakes or issues and hides it off easily. This mixture is normally preferred for ceiling as per the preference of the product. The dealer will assist you better how to go about with the procedure.

4. Veneer board and plaster: This plaster supply is used to surface the interior walls. You can apply a very thin layer of plaster of a gypsum board base. Later you can smoothen the entire coat. This product saves a lot of time and money. For example, if you are looking for renovating your old houses or building this is the best top quality plaster supplies you can purchase as it gives you all in one facility.

5. Magnesia Board: It is a non-insulating product and can be used for various applications likes ceilings linings, fascia, soffits, tile backing, and underlayment. They are useful for projects that require fire resistance, molds and mildew control.

How to Use Top Quality Plaster Supplies:

The background should be:

  • Keep the background protected.
  • Let it be strong, rigid and stable.
  • Try to keep it clean and free of dust.
  • Let the entire area be dry.
  • Also keep the surface away from salt efflorescence.

Mixing the plaster

  • All the equipments should be cleaned in order to prevent contamination.
  • Use the detailed amount of water and mix it into the bucket.
  • Mix the plaster and water in slow speed with your hand.
  • Mix well until the lumps are dispersed.


  • Do not use expired products.
  • Store the products in a place with proper room temperature.
  • Do not mix the excess amount of plaster.

Decoration and tiling

  • Paint and do the finishing of the wall carefully.
  • Do not do the finishing until the walls are dry.
  • Try applying thin coats initially.
  • According to the requirement polish, roughen and apply the primer.


  1. Great post. I used to be checking constantly this blog and
    I am impressed! Extremely helpful info specially the ultimate section 🙂
    I handle such information much. I was looking for this certain info for a very lengthy time.
    Thanks and good luck.


Please enter your comment!
Please enter your name here